Careers

  • Break Press Technician

    Job Title: Break Press Technician

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry
    Job Role: Break Press
    Compensation: Hourly (Depending on Experience)
    Employment Status: Full Time

    Responsibilities:

    • Inspect the materials by determining acceptable bend and not acceptable bend, him /her process for quality and conformance prior to their release to the next cell.
    • Must know how to determine different materials react to pressure, heat and shaping procedure. Maintain and improve product quality.
    • Must know how to determine different materials react to pressure, heat and shaping procedure. Maintain and improve product quality.
    • Producing materials according to specifications on drawings and/or schedule are the main focuses of a brake press operator.
    • Wear all proper protective equipment as required in work area in accordance with Enclose Manufacturing Safety Policy and OSHA standards.

    Skills:

    • Excellent skills in math and operating complex computerized machinery are required.
    • Exemplary motor skills are required for this position, as break press machines have multiple settings and limit switches that must be adjusted for each job quickly and preciously.
    • Good organizational skills are needed to collect and arrange his materials prior to starting each job.
    • Initiate good analytical and mathematical skills to interpret drawings, templates, and blue prints.
    • Knowledge of reading and interpreting highly detailed instructions are strongly preferred.

    Working Environment:

    The usual methods of performing the jobs functions require the following physical demands: significant lifting, carrying, pushing, pulling, kneeling, and bending. The job is performed under some temperature variations and hazardous conditions. Protective clothing, eyewear and gloves are required.

    Career Level: Any combination equivalent to High School diploma/GED or equivalent.
    Years of Experience: 1 years of responsible experience in Break Press

    Download Application
  • Engineer

    We currently do not have any open positions available for this position, however, if you would like us to keep your application on file for consideration when a new position opens, please fill out and send in an application below.

    Job Title: Engineer

    Other Positions: Draftsman

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry
    Job Role: Engineering, Draftsman
    Compensation: Hourly (Depending on Experience)
    Employment Status: Full Time

    Responsibilities:

    • New product development
    • Interaction with production personnel to improve manufacturing processes
    • Collaboration with customers and reviewing of customer orders as a basis for design
    • 3D Modeling/Drafting
    • Time studies and optimization of processes
    • Implementation of continuous improvement projects
    • Cooperation with Quality Control to improve production based on results/concerns
    • Assisting with the implementation of an automated controls department
    • Wear all proper protective equipment as required in work area in accordance with Enclose Manufacturing Safety Policy and OSHA standards.

    Skills:

    • Proficient with Solidworks CAD
    • Skills with 2D AutoCAD
    • Microsoft Office
    • Excellent oral and written communication skills
    • Work within deadlines
    • Possess a positive attitude and strong work ethic

    Working Environment:

    This position is a typical manufacturing environment with high noise level. The physical demand is the ability to sit and work on a computer for extensive periods of time is required.

    Career Level: Equivalent to graduation from an accredited school with minimum of an associate’s degree.
    Years of Experience: Experience may be substituted for education

    Download Application
  • General Labor

    We currently do not have any open positions available for this position, however, if you would like us to keep your application on file for consideration when a new position opens, please fill out and send in an application below.

    Job Title: General Labor

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry
    Job Role: Assembler
    Compensation: DOE
    Employment Status: Full Time

    Responsibilities:

    • Assemble cabinets and doors in a timely fashion in the building of Enclose Product line.
    • Maintain and improve product quality.
    • Prepare items for shipments.
    • Utilization of some resources from other cells that may be required to perform the job’s functions.
    • Perform any additional duties requested by management.
    • Wear all proper protective equipment as required in the work area in accordance with Enclose Manufacturing Safety Policy and OSHA standards.

    Skills:

    • Knowledge is required to read and understand blueprints
    • Must be able to lift over 50 lbs.
    • Must know how to read a tape measure.
    • Perform technical tasks with a need to occasionally upgrade skills in order to meet changing job conditions.
    • Specific skills required to satisfactorily perform the functions of the job include operating tools, maintaining accurate records, and following safety procedures.

    Working Environment:

    The usual methods of performing the job functions require the following physical demands: significant lifting, carrying, pushing, pulling, kneeling, and bending. The job requires some sitting and walking but mostly standing. The job is performed under some temperature variations and normal shop conditions.

    Career Level: Any combination equivalent to High School diploma/GED or equivalent.
    Years of Experience: No experience, training upon employment.

    Download Application
  • Human Resource

    We currently do not have any open positions available for this position, however, if you would like us to keep your application on file for consideration when a new position opens, please fill out and send in an application below.

    Job Title: Human Resource

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry
    Job Role: Management
    Compensation: DOE
    Employment Status: Full Time

    Responsibilities:

    • Assist with records and documents for the Quality Management System.
    • Controlling Human Resource accountabilities. This consists of maintaining employment activities (Safety and Incentive Programs, Insurance Records), records of employee status (reviews are annually), and controlling records of Inventory and job orders in the E2 System Database.
    • Examine receiving shipments to ensure shipments meet specifications.
    • Initiate Safety procedure meetings and monitor that implementation is followed.
    • Keeping in reasonable detail books, financial records and accounts of the Plant which accurately and fairly reflect the Plant’s transactions and disposition of assets, and must also maintain a system of internal accounting controls.
    • Purchasing and Vendor Contacts.
    • Verify and keep records on receiving and outgoing shipments and prepare items for shipments.
    • Wear all proper protective equipment as required in work area in accordance with Enclose Manufacturing Safety Policy and OSHA standards.

    Skills:

    • Excellent technical skills that can be utilized to improve the company’s profitability
    • Operate all tasks above in a timely and precise manner.
    • Use professional capabilities and abilities to help ensure the effective and efficient workflow of the office when interacting and cooperating with customers and associates.

    Working Environment:

    The physical demand is the ability to sit and work on a computer for extensive periods of time.

    Career Level: Equivalent to graduation from an accredited 2 year vocational school experience.
    Years of Experience: 2 years of responsible experience

    Download Application
  • Laser Technician

    We currently do not have any open positions available for this position, however, if you would like us to keep your application on file for consideration when a new position opens, please fill out and send in an application below.

    Job Title: Laser Technician

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry
    Job Role: Machine Operator
    Compensation: Hourly (Depending on Experience)
    Employment Status: Full Time

    Responsibilities:

    • Candidates must have experience in reading and understanding detailed blueprints
    • Installs and aligns optical parts, such as mirrors and wave plates, in laser body, using precision instruments.
    • Maintain and improve product quality.
    • Must be trained to drive a forklift.
    • Turns controls of vacuum pump and gas transfer equipment to purge, evacuate, and fill laser body with specified volume and pressure of gases, such as helium, neon, or carbon dioxide, to test laser beam.
    • Verify material meets specifications.
    • Wear all proper protective equipment as required in work area in accordance with Enclose Manufacturing Safety Policy and OSHA standards.

    Skills:

    • Ability to lift over 50 lbs.
    • Performs plasma/laser cutting operations efficiently per specifications.
    • Performs routine maintenance of the laser.
    • Understand, interprets and follows management’s report including priorities and start date.

    Working Environment:

    The usual methods of performing the jobs functions require the following physical demands: significant lifting, carrying, pushing, pulling, kneeling, and bending. The job is performed under some temperature variations and hazardous conditions. Protective clothing, eyewear and gloves are required.

    Career Level: Any combination equivalent to High School diploma/GED or equivalent.
    Years of Experience: 2 years of responsible metal fabrication experience.

    Download Application
  • Quality Control Manager

    We currently do not have any open positions available for this position, however, if you would like us to keep your application on file for consideration when a new position opens, please fill out and send in an application below.

    Job Title: Quality Control Manager

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry
    Job Role: Management
    Compensation: Depending on Experience
    Employment Status: Full Time

    Responsibilities:

    • Authorizing release of product in final inspection
    • Coordinate and supervise audits and manage relationships with registrar and auditors.
    • Develop and improve product and process performance using quality tools.
    • Develop and maintain quality work instructions, procedures, and guidelines.
    • Ensure the effective and efficient operation of team to provide quality improvement leadership.
    • Feedback quality problems to the audit team and find a solution to improve quality level.
    • Perform other duties as assigned or needed to support the efforts of Enclose Manufacturing.
    • Plan and conduct internal audits, processes, and actions
    • Verify and keep records on incoming and outgoing shipments and prepare items for shipments.
    • Wear all proper protective equipment as required in work area in accordance with Enclose Manufacturing Safety Policy and OSHA standards.
    • Work effectively as a team member; work with little supervision; make suggestions for process and product improvements; communicate effective with team members.

    Skills:

    • Excellent interpersonal and communication skills including strong leadership ability
    • Generate measurable gains in quality, productivity, and customer satisfaction
    • Knowledge is required to read and understand blue prints

    Working Environment:

    This position is a typical manufacturing environment with high noise level. The physical demand is the ability to sit and work on a computer for extensive periods of time is required.

    Career Level: Associates degree in Business, Engineering or other related field or a bachelor’s degree preferred.
    Years of Experience: Experience may be substituted for education.

    Download Application
  • Welder Technician

    We currently do not have any open positions available for this position, however, if you would like us to keep your application on file for consideration when a new position opens, please fill out and send in an application below.

    Job Title: Welder Technician

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry
    Job Role: Fabrication Welder
    Compensation: DOE
    Employment Status: Full Time

    Responsibilities:

    • Assemble cabinets and doors in a timely fashion and assist in building of Enclose Product line.
    • Follow safety regulations.
    • Maintain welds on two different processes manual arc and tungsten inert gas with aluminum and stainless steel material. Maintain and improve product quality.
    • Utilization of some resources from other cell that may be required to perform the job’s functions.
    • Perform any additional duties requested by management.
    • Wear all proper protective equipment as required in work area in accordance with Enclose Manufacturing Safety Policy and OSHA standards. Items may include the following: safety glasses, safety shoes/boots, hearing protection and others as determined necessary.

    Skills:

    • Perform technical tasks with a need to occasionally upgrade skills in order to meet changing job conditions.
    • Must have experience with MIG & TIG welding in Stainless Steel and Aluminum.
    • Specific skills required to satisfactorily perform the functions of the job include: operating equipment used in metal fabrication; preparing and maintaining accurate records, welding equipment and following to safety procedures.
    • Working under limited supervision. Knowledge is required to read and understand blue prints and manuals, present information to others, and solve practical problems. Specific knowledge required to satisfactorily perform the functions of the job includes: methods, techniques, materials, tools used in metal fabrication, maintenance, and repair.

    Working Environment:

    The usual methods of performing the jobs functions require the following physical demands: significant lifting, carrying, pushing, pulling, kneeling, and bending. The job requires some sitting and walking but mostly standing. The job is performed under some temperature variations and normal shop conditions.

    Career Level: Any combination equivalent to High School diploma/GED or equivalent.
    Years of Experience: 1 year of responsible metal fabrication experience.

    Download Application
  • ITS Program Eng.

    Job Title: ITS Program Eng.

    Job Location: Mitchell, South Dakota
    Company Industry: Manufacturing Industry

    Description:

    Needing qualified person to head, manage and assist in developing an ITS program for DOT Traffic Systems.

    Minimal requirements needed

    1. Bachelor's degree or equivocal in electrical engineering
    2. Minimum 5 years’ experience working with or on DOT ITS projects (Level 3 Field Operator) licensed.
    3. Experience in designing and managing ITS Field Traffic Cabinets. Used for State and Local City Run intersection Controls designs.
    4. Experience in working with project engineers for State DOT DMS, VMS systems
    5. Strong management and communication skills required.

    Individual would be responsible for managing multiple work inputs and outputs while working with project engineers and sales team in designing ITS cabinet systems per State DOT requirements and specifications. Individual will need to know the in’s and outs in obtaining successful RFQ's and all equipment needed for said projects.

    Experienced in using and programming electronic devices and systems for Traffic Cabinet Models: 332L, 334L, 3365 and The New ATC Cabinets using a variety of electronic devices for Traffic Flow Controls.

    Equipment examples listings below

    M-6D Detector Card Racks, UPS Systems, Surveillance cameras systems, Ethernet switches, Hub switches, Fiber optic panels, Vehicle detection systems, Loop monitors, Power Supply Units, Surge Suppression devices, Automatic Transfer Switches, and other network devices used in controlling traffic flows also included would be having the ability to carry out a proven robust testing process using the (HALT) principles.

    Enclose Manufacturing Inc. USA made

    1SO 9001-2015 Certified company,

    UL Listed 508A panel manufacturer of Industrial Electrical Enclosures and ITS Traffic Cabinets. IMSA Member

    Formed and founded in 1997-98

    Founder CEO/President

    Bill Wegleitner

    Download Application

Get A Quote

Contact Info

Phone: (605) 990-2555
Fax: (605) 990-2256

Physical Address:
1100 Hot Rod Road
Mitchell, SD 57301

Mailing Address:
P.O. Box 1151
Mitchell, SD 57301

Email Us

Made In The USA